Johnson Controls DWUNI, User Manual

Page: 13 / 27

function
is canceled
automatically after setting.
This function
is
only available in cooling mode.
When this function has been set, set temperature
is
displayed in
81
℉(
27
ć
)
. In
this case, temperature setting and fan speed setting are
disabled
.
This function
is canceled
when turning off the unit or switching modes.
This
function and sleep function cannot be on simultaneously. If
I
-
D
emand function
is
set first and then
S
leep function
is
set, I-
D
emand function
is canceled
while
S
leep
function
is
valid, and vice versa.
Note:
If
F
ixed-angle
s
wing function is not available for the connected unit, this
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
This function is only available in heating mode.
Ɣ
When this function has been set, set temperature is displayed
as 46 ℉
(8 ℃
)
( 46 ℉ ) . In this case, temperature setting and fan speed setting are
disabled
.
Ɣ
This function
is canceled
when switching modes.
Ɣ
This function and
S
leep function cannot be on simultaneously. If
A
bsence function
is set first and then
S
leep function is set,
A
bsence function
is canceled
while
S
leep function
is
valid, and vice versa.
3.7.
5
Memory Function Setting
After entering user function page, press “
ġ
” or “
Ģ
” button to select
M
emory function
and press “
˘
” or “ ” button to turn on or turn off
M
emory function with auto saving.
3.7.
6
Fixed-angle
SWING (Louver)
Mode Setting
3.7.
4
Absence Function Setting
After entering user function page, press “ ∧ ” or “ ∨ ” button to select
H
oliday function
option and press “ ＜ ” or “ ＞ ” button to turn on or turn off this function with auto saving.
This function
is
used to maintain indoor temperature so that unit can
recover
fas
t
heating.
Note:
After entering user function page, press “
ġ
” or “
Ģ
” button to select
L
ock swing
function option and press “
˘
” or “
˚
” button to turn on or turn off this function with auto
saving.
3.7.
2
Health Function Setting
After entering user function page, press “
ġ
” or “
Ģ
” button to select health function
and press “
˘
” or “
˚
” button to turn on or turn off health function with auto saving.
3.7.
3
I-DEMAND Function Setting
After entering user function page, press “
ġ
” or “
Ģ
” button to select IDEMAND
function option and press “
˘
” or “
˚
” button to turn on or turn off this function with auto
saving.
Note:
Wired Controller DWUNI User Manual