OPTIONAL PARTS
3-2
TC-16005-rev.2
3.2 Seismic Suspension Bracket: SSB-IDH-01
Replace the original suspension bracket to this seismic suspension bracket to prevent destruction or damage
to the ducted indoor unit during earthquake by improving its strength.
3.2.1 Applicable Unit
Model
SSB-IDH-01
Required Qty.
x 1
Applicable Indoor Unit
(H,Y)IDH072, 096B21S, (H,Y)DOA096B21S
3.2.2 Installation Work
(1) Reuse the screws attached to the unit bracket to attach the seismic suspension bracket.
(2) The additional service space is required to install the seismic suspension bracket.
(1) Remove two M6 screws securing the original suspension bracket and remove the original suspension
bracket.
3.2.3 Seismic Suspension Bracket Installation Procedures
After confirming the ducted indoor unit model, install the seismic suspension bracket according to the
following procedures. Install the seismic suspension bracket securely with the screws that are attached to
the unit. If you don’t tighten the screws well enough, the unit may fall over.
(2) Attach the seismic suspension bracket to indoor unit and secure the seismic suspension bracket by
reusing two of the screws removed from the unit.
(3) Perform the same work at the other three bracket locations. (Total four places)
Original Suspension Bracket
Indoor Unit
M6 Screws
Seismic Suspension Bracket
Indoor Unit
M6 Screws
Summary of Contents for DOA096B21S Series
