www.johnsonandstarley.co.uk
18
15.
HANDING OVER
15.1
After commissioning, the installer should hand the appliance over to the occupier of the house by the following
procedure:
15.2
Hand the User Instructions ZZ1340 to the occupier and explain their responsibilities in respect of current
legislation and regulations, both national and local.
15.3
Explain and demonstrate how to light and shut down the appliance.
15.4
In order to gain the best possible fuel economy in relation to the heating requirements of the household, carefully
explain the operation of the appliance and the use/adjustment of all the system controls.
15.5
Advise on the precautions required to prevent damage to the appliance; the system and the building in the event
of the appliance being shut down in very cold weather.
15.6
Explain how, in the event of a fault, the appliance will display a fault code, emphasising that if a fault is indicated
they should note the fault code, turn off the appliance and contact a “competent person” which in normal
circumstances would be a GAS SAFE registered engineer.
15.7
Explain and demonstrate the function/operation of time/temperature controls, emphasising the economic use of
the appliance.
15.8
A comprehensive service should be carried out ANNUALLY. Stress the importance of regular servicing by a Gas
Safe Registered Engineer. In IE servicing work must be carried out by a Registered Gas Installer (RGI).
NOTE
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
REMINDER: At the time of commissioning, complete all
relevant sections of the Benchmark Checklist located on
the inside back pages of this document prior to handing
over the appliance to the occupier.
Summary of Contents for WARMCAIR C16D
Page 29: ...29 Sales Spares Replacement Help Line 01604 762881 20 FAULT FINDING FLOW CHART...
Page 42: ...NOTES...
Page 43: ...NOTES...
