Telephone: 01604 762881
EVENT 2
(OFF AT 5.00pm MONDAY THROUGH TO FRIDAY)
Press key twice. Off symbol appears
Press h key to 05pm
Press m key once to 00
Press Day key twice 12345 is displayed
Press Programme key to enter
EVENT 3
(OFF AT 7.00pm SATURDAY)
Press key twice. ON symbol appears
Press h key to 07pm
Press m key once to 00
Press Day key 9 times 6 is displayed
Press Programme key to enter
Press key to enter run mode
IF 24 HOUR TIME CONTROL (SAME SCHEDULE EVERY DAY OF THE
WEEK) IS DESIRED IGNORE Day KEY.
25. EVENT REVIEW
To review the programs at any time, press Programme key. Events
will appear in the order they were entered with repeated presses of the
Programme key. After all events have been reviewed the display will go blank
in order to allow you to enter another event. Another press of the Programme
key will display the number of free events spaces.
26. MANUAL OVERRIDE
While in the run mode, pressing the key will reverse the current mode
i.e on to off or off to on.
27. CONTINUOUS OPERATION
While in the run mode, press the key twice to turn the output to
permanently on. The symbol appears in the display.
To revert back to timed operation press the until the symbol
appears in the display.
28. CHANGING AN EVENT
Select the event to be changed with the Programme key. A new set of days
may be selected with Day key just as in initial programming.
Hours and minutes can be changed with the h and m keys
Press the Programme key to store the new programme.
29. TROUBLESHOOTING
Problem:
Days are flashing and pressing any key does nothing BUT
key turns output ON and OFF.
Solution:
Time of Day and DAY of Week have not been set. This may
occur if the power has been off to boiler for longer than 3 days.
Problem:
Time of day was set while holding the key down but the days
are still flashing.
Solution:
Current day of the week has not been set.
Problem:
It is 10am and an ON event for 8am was entered but the output
symbol is not ON. Display shows the and the symbols.
Solution:
After programming the timer does not look back and will not take
place until the event recurs at 8am tomorrow. In order to turn the
boiler ON use the manual override.
