Johnson Amplification Marquis JM120 User Manual Download

Page: 28 / 31

Resetting the Marquis JM60/JM120

This is a hard reset procedure, which will restore the JM60/JM120 to its original factory sounds.

WARNING: THIS PROCEDURE WILL RESET ALL USER PRESETS IN THE MARQUIS TO FACTORY DEFAULT

PRESETS. BE SURE THAT YOU WANT TO ERASE THE MEMORY AND START FRESH BEFORE
CONTINUING WITH THIS PROCEDURE.

To perform a factory reset, follow these steps:

Turn the power off.

Unplug the guitar cable from the front panel of the amp.

Press and hold the American Model button down while turning the power back on. After the power has initialized and
appears in the display, release the American Model button and press the British Model button once. The display will briefly read
“

,” after which the JM60/JM120 will return to performance mode.

You have restored the JM60/JM120 to the original factory presets.

Appendix

JM60 Factory Preset List

JM120 Factory Preset List

Bank 1
1. Rectifier Solo
2. Classic Twin
3. Phasadelic

Bank 2
1. British Plate
2. Thick Boutique
3. Trem Tweed

Bank 3
1. Voxbrato
2. Johnson Grease
3. Boutique Chorus

Bank 4
1. Hot Rod Hall
2. Johnson Solo
3. Bluesy Delay

Bank 5
1. Hard Rock Verb
2. Fuzz 4ths
3. Texas Blues

Appendix

Bank 6
1. Tweed Spank
2. Mod British Stack
3. Rotary Jazz

Bank 7
1. Metal Octave
2. Ultra Clean
3. Tremolo King

Bank 8
1. Rhythm Honk
2. Run Like Hell
3. Let’s Mosh

Bank 9
1. Mr. J’s Crunch
2. Auto Volume Swell
3. Rock-A-Billy

Bank 1
1. Rectifier Solo
2. Classic Twin
3. Vibro Clean

Bank 2
1. British Plate
2. Thick Boutique
3. Roto Tweed

Bank 3
1. Voxbrato
2. Johnson Grease
3. Boutique Detune

Bank 4
1. Hot Rod Hall
2. Octave Solo
3. Bluesy Delay

Bank 5
1. Hard Rock Verb
2. 5th Down/Oct up
3. Texas Blues

Bank 6
1. Classic Phase
2. Mod British Stack
3. Rotary Jazz

Bank 7
1. Metal Flange
2. Ultra Clean
3. Tremolo King

Bank 8
1. Smooth Rhythm
2. Spacey Phase
3. Let’s Mosh

Bank 9
1. Mr. J’s Crunch
2. Auto Volume Swell
3. Rock-A-Billy

Summary of Contents for Marquis JM120
































Search results

Summary of Contents for Marquis JM120

Reviews:

Related manuals for Marquis JM120

Brands by name

Popular brands

Johnson Amplification Marquis JM120, User Manual

Search results

Summary of Contents for Marquis JM120

Reviews:

Related manuals for Marquis JM120

Brands by name

Popular brands