WARNING
!
Please read all safety warnings and installation information fully before installation.
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that
operate the product.
To avoid strangulation and entanglement, keep cords out of the reach of young children.
Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop.
The safety guides should be positioned high enough to be out of reach of small children yet
accessible to adults.
All safety guides for blinds need to be fixed to a solid surface using a screw and fixing suitable
for the wall or surface material. These items should not be glued or stuck in place.
The head rail shall not be installed less than 1.5m from the floor.
For further information go to: www.makeitsafe.org.uk
Keep out of the reach of young children.
Small parts - choking hazard.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Retain these instructions for future reference.
Batch code:
15
16
17
2cm or 3cm (depending on pulley ratio)
Safety Guide for use with Roman Blinds
A
B
end cover
chain pulley
A
A
B
C
D
B
chain pulley
15. Mounting the chain safety guide
Read these instructions carefully before installing and
using the chain safety guide.
Children can be strangled if the chain safety guide is
not installed correctly. Use of safety devices helps
reduce the risk of strangulation but cannot be
considered entirely fool proof.
15. A With the chain safety guide on the chain, mark a
suitable mounting position for the chain safety guide
at a point where it keeps the chain taut.
Note: The
safety device shall not be installed less than 1.5m
from the floor.
It is essential that the chain safety
guide is installed at the maximum distance possible
from the control mechanism to prevent the looped
chain becoming slack.
15. B Use appropriate fixings to mount the chain safety
guide, depending on the surface to which the
device is being fitted.
Children can strangle if this safety device is not
installed. Always use this device to keep cords
or chains out of reach of children.
16. Converting to left hand draw - untrimmed headrail
16. A Unscrew, slide and remove the end cover and
chain
pulley.
16. B Slide the end cover and chain pulley into the
opposite ends of the headrail from previous.
Tighten the screws to secure.
17. Converting to left hand draw - trimmed headrail
17. A Unscrew, slide and remove the end cover and
chain
pulley.
17. B Slide the inner bar at the end where the chain
pulley will be placed into the rail so it is at least
2cm from the rail end for 120 - 150cm, and 3cm
for 150 and 180cm rails.
17.C Loosen the cord guide screws. Reposition so that
they align with the cord positions on the blind.
Secure the cord guide screws.
17. D Slide the end cover and chain pulley into the
opposite ends of the headrail from previous.
Tighten the screws to secure.
cord guides
LBJLSW06
