Problem
Possible solution
The display shows Error code (e.g.
E51
).
Deactivate and activate the appliance. Start a new pro-
gramme. If the problem occurs again, contact the Serv-
ice centre.
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor
( See chapter "
Settings - Adjustment of the
remaining laundry moisture degree
" for better
setting).
• The airflow slots are clogged.
• Room temperature is too low or too high
( optimal room temperature 19°C to 24°C )
Tumble Dryer User Manual
27
