or more if Less creasing option was set (see
chapter
Option - Less creasing
).
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-
crease phase is completed. We recommend, for
better results, that you remove the laundry
when the phase is almost completed.
When the anti-crease phase is completed:
• The display still shows
• The indicator
is off.
• The indicators
Filter and
Tank remain
on.
• Start/Pause indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Possible causes of unsatisfactory drying results:
• Inadequate default dryness level settings. See
chapter
Adjustment of default dryness level
• Room temperature is too low or too high.
Optimal room temperature is between
19°-24°C.
Always clean the filter and
empty the water container
when a programme is
completed.
Stand-by function
To reduce energy consumption, this function
automatically deactivates the appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme.
The time is reduced to 30 seconds
if the selector knob is pointing to
"Reset" position.
Tumble Dryer User Manual
20
