John Lewis JLHDA623, User Manual

Page: 8 / 16

Cooker hood user guide
8
Care, cleaning and servicing
Note: Switch off and unplug the cooker hood before carrying
out any cleaning or maintenance work.
Care and cleaning
Clean the interior and exterior casing using a cloth with water
and mild (neutral) detergent.
Do not use abrasive cleaning materials or scouring pads when
cleaning the cooker hood as this may damage the stainless
steel
fi nish.
Cleaning and replacing fi lters
This cooker hood is supplied with aluminium fi lters.
Aluminium fi lters
Aluminium fi lters are designed to absorb grease and dust
during cooking. They should be removed and cleaned at least
once every two months, or more often if you regularly fry
food.
The fi lters may discolour after a few washes. This is normal
and does not mean they have to be replaced.
To clean the aluminium fi lters:
1 Remove aluminium fi lter (A).
2 Wash the fi lter in warm, soapy water.
3 Replace the fi lter in the cooker hood.
Charcoal fi lters (not supplied)
Charcoal fi lters are designed to absorb grease, dust and
unwanted odours during cooking. They are only required
when the cooker hood is used for recirculating (i.e. when it is
not ducted out).
Non-regenerable charcoal fi lters must be replaced at least
every four months.
To replace the charcoal fi lters:
1 Remove the aluminium panel (A).
2 Pull the fi lter out of the cooker hood (B).
3 Replace the fi lter. The lugs in the plastic housing will hold
the fi lters in place.
4 Close the aluminium panel.
Replacement fi lters can be obtained from www.johnlewis.com.
A
B