John Lewis JLFZW1604 Instruction Manual Download Page 7

After some seconds is shown the set default
temperature.

Functions Menu

By activating the key (D) the functions menu
is operating. Each function could be
confirmed by pressing button (E). If there is
no confirmation after some seconds the
display will go out from the menu and return
in normal condition. The following functions
are indicated:

Eco Mode function
Action Freeze function
Drinks Chill function
Child Lock function

Eco Mode Function

The Eco Mode function is activated by
pressing key D (several times if necessary)
until the corresponding icon appears 

 (or

setting the temperature at -18°C).
You must confirm the choice by pressing key
E within few seconds. You will hear the
buzzer and the icon remains lighted.
In this condition the chosen temperatures
are automatically set (-18°C), in the best
conditions for storing food.
It is possible to de-activate the function at
any time by changing the selected
temperature in the compartment.

Action Freeze Function

To freeze fresh foods, press button (D)
repeatedly to access the Action Freeze
function. 
Confirm the selection by pressing button
(E), and you will hear the buzzer and the
display will show rotating lines.

To achieve maximum freezing capacity,
allow a pre-cooling period of 24 hours,
before placing the fresh food in the
compartment with the symbol   .
The freezing process takes 24 hours. During
this period do not put other foods in the
freezer.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing button (D) until the
corresponding icon will flash and then
button (E).

Drinks Chill Function

The Drinks Chill function is to be used as a
safety warning when placing bottles in the
freezer compartment. It is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears   .
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and the icon remains lighted.
In this condition it operates a timer with a
default value of 30 min. and it could change
from 1 to 90 min., by pressing key (B) you
select the minutes needed.
At the end of the selected time there are the
following indications:
• on the indicator 

 the symbol   flashing

• the  icon   flashing
• sounding of an acoustic alarm until key (E)

is pressed

At this point bear in mind to remove the
drinks contained in the freezer
compartment.
It is possible to deactivate the function at any
time by pressing key (D) until the
corresponding icon will flash and then key
(E).

7

Summary of Contents for JLFZW1604





















Reviews: