John Lewis JLFZW1604 Instruction Manual Download Page 3

Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
• The appliance is intended for keeping

foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.

• Do not use a mechanical device or any

artificial means to speed up the thawing
process.

• Do not use other electrical appliances

(such as ice cream makers) inside of
refrigerating appliances, unless they are
approved for this purpose by the
manufacturer.

• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is

contained within the refrigerant circuit of
the appliance, a natural gas with a high
level of environmental compatibility,
which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit
become damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of

ignition

– thoroughly ventilate the room in which

the appliance is situated

• It is dangerous to alter the specifications

or modify this product in any way. Any
damage to the cord may cause a short-
circuit, fire and/or electric shock.

Warning!

 Any electrical component

(power cord, plug, compressor) must
be replaced Service Force agent.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back of
the appliance. A squashed or
damaged power plug may overheat
and cause a fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.
5. If the power plug socket is loose, do

not insert the power plug. There is a
risk of electric shock or fire.

6. You must not operate the appliance

without the lamp cover of interior
lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are
damp/wet, as this could cause skin
abrasions or frost/freezer burns.

• Avoid prolonged exposure of the

appliance to direct sunlight.

• Bulb lamps used in this appliance are

special purpose lamps selected for
household appliances use only. They are
not suitable for household room
illumination.

Daily Use

• Do not place hot items such as pans and

baking trays near the plastic components
of the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may explode.

• Do not place food products directly

against the air outlet on the rear wall.

1)

• Frozen food must not be re-frozen once it

has been thawed out.

1) If the appliance is Frost Free

3

Summary of Contents for JLFZW1604





















Reviews: