22
If connecting to LPG the bayonet hose must
have red bands on it.
Smooth welded connector:
Make the connection to the appliance using
a flexible bayonet style hose in accordance
to B.S. 669. The hose connection at the rear
of the appliance has a ½” BSP internal
thread. Always apply a suitable sealing
substance (such as Teflon tape) between the
flexible connection L and the appliance
supply tube B. When making the connection,
make sure that no stress of any kind is
applied to the cooker and that the hose does
not touch any sharp edges.
If connecting to LPG the bayonet hose must
have red bands on it.
Adaptation to different
types of gas
The cooker hob is preset for natural gas G20
(2H) at a pressure of 20 mbar. In the case of
operation with other types of gas the burner
nozzles must be changed and the minimum
flame adjusted on the gas taps.
Replacement of nozzles on the
hob
To change the nozzles, proceed as described
below:
1 Extract the grids and remove all the caps
and flame-spreader crowns;
2 Unscrew the burner nozzles with a 7 mm
socket wrench;
3 Replace the nozzles according to the type
of gas to be used
4 Replace the burners in the correct
position.
Warning!
Before performing
any cleaning or maintenance
work, disconnect the appliance
from the mains.
