Installation
Caution! It is necessary to
protect the underside of the
kitchen worktop from
condensation. A plastic top
cover can be purchased,
contact your local John Lewis
branch.
Be sure that once the appliance has
been installed, it is easily accessible
for the service engineer in the
event that a repair is required.
The appliance plinth is not
adjustable.
Unpacking
Remove all packaging before positioning the
appliance.
Position the appliance next to a water tap and a
drain.
Fitting under the kitchen
counter
By removing the worktop of the appliance, you
can install it under the kitchen counter or a close
fitting sink.
The dimensions of the recess must correspond
to those in the picture.
820 mm
570-600 mm
600 mm
Removing the appliance worktop
1. Remove the appliance worktop by unscrewing
the 2 rear retaining screws (1).
1
2. Pull the worktop from the back of the
appliance (2).
2
3. Lift the worktop (3) and slide it out of the front
slots.
Dishwasher User Manual
29
