background image

German degrees

(°dH)

French degrees

(°fH)

mmol/l

Clarke de-

grees

Water softener level

15 - 18

26 - 32

2.6 - 3.2

18 - 22

4

11 - 14

19 - 25

1.9 - 2.5

13 - 17

3

4 - 10

7 - 18

0.7 - 1.8

5 - 12

2

<4

<7

<0.7

< 5

2)

1) Factory setting.

2) Do not use salt at this level.

How to set the water softener level

The appliance must be in programme selection

mode.

1. To enter the user mode, press and hold

simultaneously 

Delay

 and 

Option

 until the

indicators Eco, Auto and Intensive start to flash

and the display is blank.

2. Press 

Programmes

.

• The indicators Auto and Intensive go off.

• The indicator Eco continues to flash.

• The display shows the current setting: e.g.

 = level 5.

3. Press 

Programmes

 again and again to change

the setting.

4. Press the on/off button to confirm the setting.

The rinse aid dispenser

The rinse aid helps to dry the dishes without

streaks and stains.
The rinse aid is automatically released during the

hot rinse phase.
You can set the released quantity of rinse aid

between level 1 (minimum quantity) and level 6

(maximum quantity). Level 0 will deactivate the

rinse aid dispenser and no rinse aid will be

released.
Factory setting: level 4.

How to set the rinse aid level

The appliance must be in programme selection

mode.

1. To enter the user mode, press and hold

simultaneously 

Delay

 and 

Option

 until the

indicators Eco, Auto and Intensive start to flash

and the display is blank.

2. Press 

Delay

.

• The indicators Eco and Auto go off.

• The indicator Intensive continues to flash.

• The display shows the current setting: e.g.

= level 4.

– The levels of rinse aid are from 0A to

6A.

– Level 0 = no rinse aid is released.

3. Press 

Delay

 again and again to change the

setting.

4. Press the on/off button to confirm the setting.

Use of rinse aid and multi-
tablets

The factory setting of the rinse aid dispenser is

with the dispenser activated. This means that

the rinse aid dispenser always releases rinse aid.
It is possible to deactivate the rinse aid

dispenser, in this case the dispenser will not

release rinse aid only if the option Multi tab is

activated.
If the dispenser is deactivated and you do not

select the option Multi tab, the dispenser will

release rinse aid.

Dishwasher User Manual

12

Summary of Contents for JLDWS1229





































Reviews: