The related indicator flashes.
2. Change the options. The given information in
the display changes accordingly.
3. Touch the button Start/Pause again.
The washing programme continues.
Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the appliance.
2. Press the button On/Off again to activate the
appliance.
If the SensiCare System has
completed and the water filling has
already started, the new
programme starts
without
repeating the SensiCare
System
. The water and the
detergent are not drained out in
order to avoid waste. The display
shows the maximum duration of
the programme, updating it about
20 minutes after the starting of the
new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
Opening the door - Adding
garments
If the temperature and level of the
water in the drum are too high
and/or the drum is still rotating
you should not open the door.
While a programme or the delay start operates,
the appliance door is locked. The display shows
the indicator
.
1. Touch the Start/Pause button.
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary, add or
remove the items. Close the door and touch
the Start/Pause button.
End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The display
shows
The indicator of the Start/Pause button goes
off.
The door unlocks and the indicator
goes
off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end of
the previous programme. Turn the
programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent dispenser
slightly ajar to prevent mildew and odours.
5. Close the water tap.
Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The time area shows
and the display
shows the door locked
.
• The indicator of the Start/Pause button starts
flashing.
• The drum still turns at regular intervals to
prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the door:
1. If necessary, touch the Spin button to decrease
the spin speed proposed by the appliance.
Washer Dryer User Manual
41
