1.
Put two polystyrene packaging elements on the
floor under the appliance.
Warning! It is strongly
recommended that this
action is carries out by two
persons.
2.
Carefully put the appliance down on its rear side.
Make sure not to damage the
hoses.
1
2
3.
Remove the polystyrene protection from the
bottom.
1
2
4.
Return the appliance in vertical position and
remove the socket polystyrene protection.
5.
Remove the power supply cable and the drain
hose from the hose holders.
It is possible to see water
flowing from the drain hose. This
is due to the testing with water
of the appliance in factory.
Washer Dryer User Manual
11
