4. Put the door on a soft cloth on a stable
surface.
5. Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
2
B
6. Pull the door trim to the front to remove it.
7. Hold the door glass panels by their top edge
and carefully pull them out one by one. Start
from the top panel. Make sure the glass slides
out of the supports completely.
8. Clean the glass panels with water and soap.
Dry the glass panels carefully.
When the cleaning is completed, install the glass
panels and the oven door. Do the above steps
in the opposite sequence.
Make sure that you put the glass panels (A and
B) back in the correct sequence. The first panel
(A) has a decorative frame. The screen-printing
zone must face the inner side of the door. Make
sure that after the installation the surface of the
glass panel frame (A) on the screen-printing
zones is not rough when you touch it.
A
B
C
Make sure that you install the middle panel of
glass in the seats correctly.
A
B
C
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
Oven User Manual
27
