John Lewis JLBIFF1808, User Manual

Page: 18 / 32

Problem Possible cause Solution
The compressor does not
start immediately after
pressing the Fast Freeze
or Intensive Cooling
button, or after changing
the temperature. This is normal, no error has
occurred. The compressor starts after a period
of time.
Temperature cannot be
set . Fast Freeze or Intensive Cooling
functions switched on. Switch off Fast Freeze or Intensive
Cooling manually, or wait to set the
temperature until the function has
reset automatically. Refer to "Fast
Freeze or Intensive Cooling function"..
The temperature in the
appliance is too low/high.
The temperature regulator is not set
correctly. Set a higher/lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
high. Let the product temperature
decrease to room temperature
before storage.
Many products are stored at the
same time. Store less products at the same time.
The temperature in the
refrigerator is too high.
There is no cold air circulation in the
appliance. Make sure that there is cold air
circulation in the appliance.
The temperature in the
freezer is too high. Products are too near to each other. Store products so that there is cold
air circulation.
Upper or lower square is
shown in the temperature
Display. An error has occurred in measuring
the temperature. Call your service representative (the
cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
dEMO appears on the
Display. The appliance is in demonstration
mode (dEMO). Keep pressed approximately 10 sec.
the OK button since a long sound of
buzzer is heard and the Display shut
off for a short while: appliance start
works regularly.
Replacing the lamp
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Service Center .
18 Fridge-Freezer user manual