M6 X 40mm x 2
M6 Spring Washer
x 2
M6 Washer x 2
M4 Allen Key x 1
H.
G.
J.
A.
4/7
Step Three
Step Four
M4 Allen Key x 1
Lower the Centre Rail (6) into the brackets in the centre of the Headboard (1) and Footboard (2) as shown in Fig.3.
Now secure the Centre Rail (6) using the M6x25mm Bolts (I) and tighten with the M4 Allen Key (A) as shown
in Fig.4. You can now tighten the bolts in the Side Rails from the previous step (Step two) with the M5 Allen Key (B)
so that all the fastenings are secure.
M5 Allen Key x 1
M6 x 25mm x 2
I.
A.
B.
Centre Rail
F
ig.
3
6
1
2
And
M4(A)
M6 x 25(I)
Fig. 4
6
1
2
And
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
(FROM STEP TWO)
2
x2
1
3
M8x45mm (K)
(L)
M5(B)
1
2
3
6
(Footboard)
Bolt inserted
on Outer Hole
ONLY
x 2
M6 x 40mm (J)
M6 Spring Washer
(G)
M6 Washer (H)
M4 (A)
From the previous step (Step One), continue to hand-tighten the leg onto the Side Rail (3) to loosely secure the
parts together onto the Footboard (2) using the M6 x 40mm Bolt (J), M6 Spring Washer (G) and M6 Washer (H).
Adjust the leg accordingly, and now you can tighten all the bolts including those from the previous step
(Step One) with the Allen Key M4 (A) so all the fastenings are now tightened. (As per diagram below
AFTER INSERTING SIDE RAIL,
TIGHTEN ALL LEG FIXINGS FULLY
INCLUDING BOLTS AT FOOTBOARD
(FROM STEP ONE)
1
2
3
HEAD
HEAD
HEAD
