Step 1
Insert Dowel M8 x 30mm (T) to Horizontal Rail
(1) and Vertical Rail (2) in pre-drilled holes.
Then insert Minifix (D) to Side Rail (3) as shown
below.
Step 2
Attach Vertical Rail (2) to Horizontal Rail (1) and
tighten using Camfix (C) with a Phillips Head
Screwdriver as shown in the diagram below.
Step 3
Attach Side Rail (3) to Horizontal Rail (1) and
Vertical Rail (2), tighten using Camfix (c) with
a Phillips Head Screwdriver as shown in the
diagram below.
Step 4
Attach Book Rack assembly inside the Ashton
High Sleeper Bed as shown in the diagram
below. Then using bolt M6 x 35mm
(H) and tighten using Allen Key M4 (A). Make
sure bolt M6 x 35mm (H) can be inserted
and tightened in the Book Rack, Bed Right and
Left Leg Poles.
Note:
Please ensure the minifix (D) used on the above step is
11mm
not
9mm.
x 2
Please Note:
Part 1 above is fitted flush
to the top of part 2.
