Step 6
Secure Bottom Rail Back (7) with CSK Wooden
Screw M4 x 50mm (J) using Phillips Head
Screwdriver. Secure Bottom Rail Front (8) and
tighten using CSK Wooden Screw M4 x 32mm (K)
using a Phillips Head Screwdriver.
Step 7
Attach Top Panel (1) to assembly and lock the
Side Panel with Camfix (C) to the Top Panel
using a Phillips Head Screwdriver, as shown in the
diagram below.
Step 8
Attach Door Panel (6) using Hinges 7/8” (P) and tighten it using CSK Wooden Screw M3.5 x 16mm
(L) as shown in the diagram below. Repeat this for Door Panel (6). Attach Handle (O) to Door Panel
(6) using Handle bOLT M4 x 38mm (M) and tighten it using Phillips Head Screwdriver. Insert Shelf
Pin (R) to Side Panels (2) using appropriate pre-drilled holes making sure that they are all at the
same level.
