-2-
Aerator
Sink Fitting
B. Sink Fittings:
Each machine comes with 5 sink fit-
tings (figure 5). These fittings convert
the aerator threads on your faucet to gar-
den hose threads.
• To install sink fitting, use your
hand or a pair of pliers to remove
aerator from faucet. Avoid using
plastic faucets or spickets. Then
install corresponding sink fitting
on faucet (figure 4).
• The Standard Fitting (figure 6) has
both inner and outer threads. It will
fit about 90 percent of the faucets.
• The Standard Extended Fitting has the
same male threads as the standard fit-
ting. These threads are extended
slightly above the fitting. This fitting
is used on recessed faucets commonly
found in bathrooms.
• The 13/16 male fitting is the third most
common fitting.
• The 13/16 female and 3/4 female fit-
tings are rarely used but nice to have.
These fittings will fit some of the old-
style gooseneck faucets.
For garden hose-type spigots, sink fit-
tings aren’t necessary. The garden hose
swivel nut on the end of the red pres-
sure hose connects directly to garden
hose spigots.
C. Unrolling Hoses:
Place machine 30-40 feet from sink.
To avoid knocking machine over when
unrolling hoses, point it toward the sink.
Place one arm through the middle open-
ing of hoses (figure 7) and feed the hose
out as you walk away from the machine
and towards the sink.
HINT:
New hoses take about a week to
break in. If you roll and unroll the hoses
the same way each time, they break in
faster and are easier to use.
Figure 7:
Unrolling Hoses
Inner Threads
Outer Threads
Figure 6:
Inner and outer threads
of Standard Fitting
Standard Fitting
13/14" Female
3/4" Female
13/16" Male
Standard
Extended Fitting
Lip Hook
Figure 5:
Sink Fittings
& Adapter Tray Contents
Butterfly
Valve
Impeller
Screened
Washer
Garden Hose
Washer
Tip Kit
Washer
Figure 4:
Attaching Sink Fitting to Faucet
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
