Safety
OUO6075,00026A4 -19-06FEB03-1/1
DX,WW,RECEIVER -19-24AUG10-1/1
DX,AVOID,BACKOVER,ACCIDENTS -19-30AUG10-1/1
Service Drive Belts Safely
When servicing drive belts always observe these
precautions:
•
Avoid serious injury from hand or arm entanglement.
Never attempt to clean, check or adjust belts while the
machine is running. Always shut off the engine, set the
parking brake and remove the key.
•
Do not attempt to clean belts with flammable cleaning
solvents.
TS285
—UN—23AUG88
Handle Electronic Components and Brackets
Safely
Falling while installing or removing electronic components
mounted on equipment can cause serious injury. Use a
ladder or platform to easily reach each mounting location.
Use sturdy and secure footholds and handholds. Do not
install or remove components in wet or icy conditions.
If installing or servicing a RTK base station on a tower or
other tall structure, use a certified climber.
If installing or servicing a global positioning receiver mast
used on an implement, use proper lifting techniques and
wear proper protective equipment. The mast is heavy and
can be awkward to handle. Two people are required when
mounting locations are not accessible from the ground
or from a service platform.
TS249
—UN—23AUG88
Avoid Backover Accidents
Before moving machine, be sure that all persons are clear
of machine path. Turn around and look directly for best
visibility. Use a signal person when backing if view is
obstructed or when in close quarters.
Do not rely on a camera to determine if personnel or
obstacles are behind the machine. The system can be
limited by many factors including maintenance practices,
environmental conditions, and operating range.
PC10857XW
—UN—15APR13
10-16
070717
PN=35
