Safety
MB60223,0000098 -19-29SEP08-1/1
TX,SURGE -19-19JAN11-1/1
TX03679,0001732 -19-29AUG07-1/1
Park and Prepare for Service Safely
Warn others of service work.
Always park and prepare
your machine for service or repair properly.
•
Park machine on a level surface and lower blade and
attachments to the ground.
•
Place park lock lever in “up” (locked) position and stop
engine.
•
Attach a “Do Not Operate” tag in an obvious place in
the operator's station.
Securely support machine or attachment before working
under it.
•
Do not support machine with blade or attachments.
•
Do not support machine with cinder blocks or wooden
pieces that may crumble or crush.
•
Do not support machine with a single jack or other
devices that may slip out of place.
Understand service procedures before beginning repairs.
Keep service area clean and dry. Use two people
whenever the engine must be running for service work.
T133332
—19—17APR13
TS229
—UN—23AUG88
Service Cooling System Safely
Explosive release of fluids from pressurized cooling
system can cause serious burns.
Do not service radiator through the radiator cap. Only fill
through the surge tank filler cap. Shut off engine. Only
remove surge tank filler cap when cool enough to touch
with bare hands. Slowly loosen cap to relieve pressure
before removing completely.
TS281
—UN—15APR13
Remove Paint Before Welding or Heating
Hazardous fumes can be generated when paint is heated
by welding or using a torch. Dust from sanding or grinding
paint can also be hazardous.
Remove paint to at least 76 mm (3 in.) from area to
be heated. Wear an approved respirator when sanding
or grinding paint. If a solvent or paint stripper is used,
wash area with soap and water. Remove solvent or paint
stripper containers from work area, and allow fumes to
disperse at least 15 minutes before welding or heating.
Work outside or in a well-ventilated area. Dispose of
waste, paint, and solvents properly.
T133546
—UN—24AUG00
TM10779 (03MAY19)
9000-01-10
850JR MCT Crawler Dozer
050319
PN=16
