Safety
MB60223,000004F -19-02MAY08-1/1
TX03679,00016F2 -19-12FEB07-1/1
TX03679,0001799 -19-22APR10-1/1
TX03679,00016DD -19-19MAR07-1/1
Cab Guarding For Special Uses
Special work situations or machine attachments may
expose the operator to intruding or flying objects.
Using this machine in a forestry application or woods
environment, or with attachments such as a winch,
requires added guarding to protect the operator.
Forestry protection packages or special screens should be
installed when working in areas where logs or branches
may strike the operator. A rear screen should always
be used with a winch to protect against a snapping
cable. Contact your authorized dealer for information on
protective guarding before operating in any hazardous
environment.
T139005
—UN—05MAR01
Use Steps and Handholds Correctly
Prevent falls by facing the machine when you get on and
off. Maintain 3-point contact with steps and handrails.
Never use machine controls as handholds.
Use extra care when mud, snow, or moisture present
slippery conditions. Keep steps clean and free of grease
or oil. Never jump when exiting machine. Never mount or
dismount a moving machine.
T133468
—UN—15APR13
Start Only From Operator's Seat
Avoid unexpected machine movement. Start engine only
while sitting in operator's seat. Ensure all controls and
working tools are in proper position for a parked machine.
Never attempt to start engine from the ground. Do not
attempt to start engine by shorting across the starter
solenoid terminals.
T133715
—UN—15APR13
Use and Maintain Seat Belt
Use seat belt when operating machine
. Remember to
fasten seat belt when loading and unloading from trucks
and during other uses.
Examine seat belt frequently. Be sure webbing is not
cut or torn. Replace seat belt immediately if any part is
damaged or does not function properly.
The complete seat belt assembly should be replaced
every three years, regardless of appearance.
T133716
—19—17APR13
TM10779 (03MAY19)
850JR MCT Crawler Dozer
050319
PN=12
