6
Operating Instructions
1. Take the unit out of the box.
2. Press the red button and slide the cover backwards, then remove accessories.
3. Open the jet nebulizer (Fig. A) and pour the medication to nebulize into it. Do not
pour more than 10 ml. (Fig. B), then twist both parts and close again. (Fig. C).
4. Connect the tubing to the jet nebulizer and the other end to the nebulizer outlet.
(Fig. D).
5. Put the mask or the mouth piece to be used into the jet nebulizer (Fig. E).
6. Connect the unit to a suitable power receptacle.
7. Turn the unit on pressing the ON/OFF switch to start the treatment.
8. Turn the unit off and unplug it once the treatment has finished.
9. Clean the jet nebulizer and the devices as indicated in “Cleaning” section.
10. Store the jet nebulizer and the devices in the unit’s storage compartment.
Filter change
1. Filter should be changed every 6 months or sooner if the filter turns completely gray
in color.
2. Remove filter cap by grasping it firmly and pulling out the unit.
3. Change the dirty filter of the cap with small, pointed object.
4. Insert a clean John Bunn filter. Extra filters are available.
5. Push filter cap with new filter into position.
Caution:
Do not use cotton or any other material. Do not wash or clean the filter. Use only John
Bunn filters. Do not operate without a filter.
