© 2021 John Blue Co.
9
4.) Gas Engine Drive Configuration (P/N: CS-150RG):
Installation:
This configuration is designed to drive the pump via a gas engine. The recommended engine is a Honda GX-160
(John Blue Part Number: 113798-01).
** Note that any plumbing must be supported so that its weight does not hang off the pump, this will void the
warranty.
Storage:
After use, flush the pump with a solution that will neutralize the fluid you have been pumping, and then drain, then
fill the pump with RV antifreeze for storage.
Maintenance:
Inspect the seal reservoir fluid level using the sight window, the fluid level should be above the middle of the
window. If the fluid is dirty, drain the pump by vacuum or turning upside down, then replace with 50/50 premixed
ethylene glycol antifreeze. If fluid is cloudy, impeller side seal may be leaking.
