JOHN BLUE CS-150 Series Installation And Operation Manual Download Page 12

 

© 2021 John Blue Co.

 

12

 

 

 

Note to the Owner 

The pump should be inspected annually for any wear or damage to any of the components in order to ensure 
proper operation. Enter the date of installation in the space provided for future reference.  This information will be 
required for ordering replacement parts or servicing your pump.  

 

Our engineering department constantly improves its products.  We reserve the right to make design and 
specification changes without notice. 

DATE OF INSTALLATION: ___________ 

 
 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

John Blue Company 

Division of Advanced Systems Technology 

165 Electronics Blvd., Huntsville AL 35824 

Telephone: (256) 721-9090 

 Fax (256)-721-9091 

Toll Free 1-800-253-2583 

www.johnblue.com

  

       

 

 

 

YOUR

 

LOCAL

 

DEALER

                                             

 

 

LIMITED WARRANTY 

THIS WARRANTY IS IN LIEU OF ALL OTHER WRITTEN OR EXPRESS WARRANTIES AND REPRESENTATIONS. ANY IMPLIED 
WARRANTIES INCLUDING MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THIS 
WRITTEN WARRANTY.  JOHN BLUE COMPANY SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES. 
 
Use of this product for any purpose other than its original intent, abuse of the product, and/or any modification to the original product is 
strictly prohibited by the manufacturer, John Blue Company.  Any modification to the product should be approved by John Blue Company 
prior to use.  John Blue Company will deny Warranty claims and liability in any situation involving misuse, abuse or modification. 
 
Each new machine or component manufactured by John Blue Company through original buyer is warranted by John Blue Company to buyer 
and to any party or parties to whom buyer may resell, lease or lend the equipment to be free from defects in material and workmanship 
under normal use and service. This obligation of John Blue Company under this warranty is limited to the repair or replacement of defective 
parts or correction of improper workmanship of any parts of such equipment which shall within one year from the date of John Blue’s original 
delivery thereof, be returned to John Blue’s factory, transportation charges prepaid and which John Blue Company shall determine to its 
satisfaction upon examination thereof to have been thus defective.  When it is impractical to return the defective parts of such equipment to 
John Blue’s factory, then John Blue shall have no liability for the labor cost involved in repairing or replacing any such parts and shall be 
liable solely for supplying the material necessary to replace or repair the defective parts, provided that prior thereto John Blue Company shall 
have determined to its satisfaction that any such parts are thus defective. 
 
This warranty shall not apply to any equipment which shall have been repaired or altered outside John Blue’s factory in any way so as to 
affect its durability, nor which has been subjected to misuse, abuse, negligence or accident, or operated in any manner other than in 
accordance with operating instructions provided by John Blue Company.   This warranty does not extend to repairs made necessary by the 
use of inferior or unsuitable parts or accessories, or parts or accessories not recommended by John Blue Company. 
 
John Blue Company makes no warranties in respect to parts, accessories or components not manufactured by John Blue Company, same 
ordinarily being warranted separately by their respective manufacturers. 
 
DIVISION OF ADVANCED SYSTEMS TECHNOLOGIES 

 HUNTSVILLE, AL  

(256) 721-9090 

Summary of Contents for CS-150 Series













Reviews: