ATTENTION:
Use the RING STICK to push LARGE STIX
into the CUTTING UNIT until it
STOPS
.
Press the CUTTING PLUNGER
down to cut. The cut LARGE
STIX drops out of CUTTING
CHUTE.
Repeat steps 4 and 5,
if desired.
TIP:
Tilt CUTTING
UNIT forward to
remove any
CUTS left in the
CHUTE. If the cut
piece doesn’t drop
out, see “Clearing
the Cutting Unit”
on page 2.
CUTTING
LARGE
STIX FOR MAKING BRACELETS & NECKLACES
TIP:
CUTTING MOULDS and RING STICK can be
stored as shown.
Rotate CUTTER KNOB on CUTTING UNIT to the Medium / Large Stix position.
Remove CUTTING MOULD, if necessary.
No CUTTING FRAME will be used for the LARGE STIX.
1
2
Insert a LARGE STIX into the CUTTING UNIT.
3
4
When finished cutting, tilt CUTTING UNIT to remove
any uncut STIX. Proceed to CORING, Page 6.
MINI STIX
CUTTING FRAME
MEDIUM STIX
CUTTING FRAME
MEDIUM / LARGE STIX
POSITION
CUTTER KNOB
5
6
7
RING STICK
CAUTION:
NEVER insert finger into the CUTTING
UNIT. Toy contains an inaccessible sharp edge.
2
5
Summary of Contents for Cutie Stix
Page 11: ...Refill pack available Make even more Cutie Stix 11...
Page 12: ...COOL 12...
