User Manual Ecclesia T-250 / D-350 / D-450
21
4.8.3
Memory lock
The memory can be secured through a key switch. By turning the key a quarter to
the right, the security of the memory is removed. In this position, the key can not
be taken out of the lock.
Turn the key a quarter to the left to avoid unwanted overwriting of the memory.
Optionally the key can be taken out of the lock.
4.9
Transposer
The Transposer function shifts the pitch by half-tone increments (from -8 to +8).
The transposer setting can be read on the display (
Trans: …
).
1. Press the TRANS piston.
2. Use the - and + pistons to set the pitch.
3. When the transposer change needs to be saved, press the SET piston in the
time the TRANS. piston is lit.
4.10
Crescendo Pedal
The crescendo pedal can be used to activate 20 registrations step-by-step. These
registrations start with very quiet (pianissimo) to very loud (tutti).
The default registrations of the 20 steps can be changed. See § 5.1 Crescendo.
Activating the crescendo pedal
If the crescendo pedal is not activated it is indicated on the displays with
Cresc:Off
.
Use the CR piston to activate the crescendo pedal. The display indicates the actual
step.
Crescendo pedal as additional swell pedal
The crescendo pedal can also be configured as a swell pedal. See § 5.3 Expression
Pedals.
If the crescendo pedal is set as additional swell pedal, all functions of the original
crescendo pedal are deactivated.
4.11
Quick Access
Quick Access is a function to quickly access certain function of the organ.
The actual state of the memory lock is also reflected in the SET piston. This piston
will light when the key of the memory lock is turned to the right, indicating that
the SET piston can be used.
If the SET piston is not lighted, no menu functions for which the SET piston needs
to be pressed can be used.
