Johannus classic 250, User Manual

Page: 29 / 52

User Manual Classic 250/350 29
6. Press the ENTER piston. A request for confirmation
appears on the display.
7. Use the - and + pistons to select
No
or
Yes
.
8. Press the ENTER piston to confirm and to return to the
Key Volumes menu.
9. Press the MENU piston twice to exit the Johannus
Menu.
5.9 MIDI Config
MIDI is a protocol for communication between the organ and other devices, such as PC,
Johannus MIDI Se or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any MIDI
channel (1-16).
The four parts of the programmable MIDI code are: Channel, Msb, Lsb en Voice.
1. Press the MENU piston
2. Use the - and + pistons to select the
MIDI Config
function on the display.
3. Press the ENTER piston. A question to select a MIDI
stop to configure appears on the display.
4. Activate the MIDI stop which has to be configured
(MIDI from the Swell, for example). The display shows
on the first line:
Swell Channel
(the selected MIDI
stop and the first part of the MIDI code) and on the
second line the settings of all four parts: Channel, Msb,
Lsb en Voice.
5. Use the - and + pistons to select the desired MIDI-
channel.
6. Press the ENTER piston. The display shows:
Swell
Msb
.
7. If needed, use the - and + pistons to select the desired
Msb setting.
Reset ALL stops?
No/Yes
Reset ALL stop?
No/Yes
Key Volumes
Reset one stop
Classic Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
MIDI Config
Johannus Menu:
Crescendo
Select a MIDI
Stop to config
Swell Msb
2 0 0 1
Swell Channel
2 0 0 1
Swell Channel
2 0 0 1
Swell Msb
2 0 0 1