Johannus classic 250, User Manual

Page: 18 / 52

User Manual Classic 250/350 18
4.9 Pre-programmed memory locations
Pre-programmed memory locations are available by operating pistons PP to T and
PL. These seven memory locations have factory settings (presets) appropriate for
the quiet pianissimo to the loud tutti and the classic plenum.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T or PL). The active stops light up.
Programming a pre-programmed memory location:
1. Select the desired stops.
2. Press the SET piston. Hold the piston.
3. Press the desired pre-programmed memory location (PP-T or PL).
4. Release the SET piston.
4.10 Capture memory
Through use of the capture memory, a
registration can be activated with just one
piston. The capture memory consists of 75
levels.
These levels can be seen on the display (
Mem:…
). Each level has eight memory
locations (pistons 1-8). The 600 capture memory locations are not pre-
programmed and can be programmed by the musician.
Programming a capture memory location:
1. Select the desired stops.
2. Use the - and + pistons to select a level (1-75) on the display.
3. Press the SET piston. Hold the piston.
4. Press the desired memory location (1-8).
5. Release the SET piston.
Calling up a capture memory location:
1. Use the - and + pistons to select the desired level (1-75) on the display.
2. Press the desired memory location (1-8). The active stops light up.
The current setting of the pre-programmed memory location will be lost.
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.
The current setting of the capture memory location will be lost.
Am:Center Mem: 1
Tr: 0/440 Cr:--