3
2
3
1
4
Make sure the positioning straps and sling
identification label are on the outside of the sling.
Feed the sling down the back of the patient,
leaving the aperture at the base of the spine.
Check the sling is square across the shoulders.
Whilst ensuring that the leg section is not
twisted, carefully feed it under and up between
the patient’s legs. Repeat this procedure for the
other leg. Cross strap A through strap B or utilise
the dignity loop where present.
Pass strap C up through strap B then repeat for
the other leg using strap D through strap A. Check
the sling is smooth under the patient and the
position is comfortable.
Move the hoist into position and attach the leg
straps to the
front
hooks on the spreader bar.
Next attach the shoulder straps to the side hooks,
ensuring they have freedom to move/slide. The
lift may move towards the patient as you do
this. When reseating the client, use the sling
positioning handle/s to help achieve a safe and
comfortable position.
NOTE:
Sling positioning handles are designed
for turning a patient only and must not be used
for lifting.
Fitting the Sling from a Seated Position
Oxford
®
UltraFine Reflex Sling
English
