12
English
Hoyer
®
HPL500
On-Board Redundant Controls:
On-board redundant controls enable the lift to be raised or lowered in the
event of an emergency (Fig. 10).
If your lift incorporates powered leg positioning, there are redundant
controls to both open and close the legs. (Fig 11).
Battery Information:
The display showing full battery means that the battery is fully charged
and the lift is ready for use (Fig. 12).
The display indicates the battery is at 25-50% and charging is
recommended (Fig. 13).
The display indicates the battery is below 25% and requires charging. At
this state, the control box will provide an audible alert when a button is
pressed (Fig. 14).
WARNING
To avoid possible permanent damage to the battery, the battery should be placed on
charge as soon as the display indicates the half empty battery symbol (Fig. 14).
Fig. 12
Fig. 14
Fig. 15
Fig. 10
Fig. 11
Fig. 13
The empty battery symbol showing on the display indicates the
battery needs charging. At this stage, some of the functionality
of the lift is lost and it is only possible to drive the lifting arm
down. The symbol will switch between the two pictures for 10
seconds (Fig.15.). Permanent damage to the battery is likely to
occur with continued battery depletion to this state.
