15
16
LINE INPUTS
·
XLR input 10K impedance floating balanced current mode.
·
Instrument input 1 megohm impedance unbalanced.
OVERLOAD MARGIN
·
greater than
30dB on Mic and Line inputs in normal operation.
GAIN
·
Line in -10dB to 15dB
·
Instrument in 10dB to 45dB
·
Mic in 15dB to 80dB
·
Insert gain 10dB
NOISE
·
Line in at least 90dB below operating level
·
Mic in at least 125.5dB below input at 50dB gain 20Hz to 20KHz across
200ohm load resistor. Self noise approx -132dB
HARMONIC DISTORTION
·
Generally within 0.002%
AMPLITUDE FREQUENCY RESPONSE
·
Line in 12Hz to 20KHz within 0.5dB
·
Mic in 12Hz to 16KHz within 1dB
·
High pass filter 3dB down at 50Hz
FILTER
·
Push button high pass filter switch (and indicator) operates at 50Hz at
12dB per octave.
OUTPUTS
·
High level balanced 150 ohm 0dBu for 0VU (variable)
·
Max. balanced output approx. +24dBu
·
Insert, Tip and Ring jack socket. 400 ohm -10dBu output, 22K ohm
input.
COMPRESSOR
·
Photo resistive servo operated
·
Ratio minimum approx. 1.5 to 1
·
Ratio maximum approx. 15 to 1 (position 5)
·
Attack time 0.5mS min. 10mS max. (variable)
·
Release time 250mS min 2.5S max. (variable)
MEEQUALIZER
·
Shelving high and low frequency controls (8K and 100Hz)
·
Mid frequency cut/boost control at 1.5KHz.
·
Bypass switch with indicator
·
Cut/boost levels approx 15dB
DIGITAL OUTPUT
The 'TwinQ' has the facility for fitting a Joemeek VC1QD digital unit. This
will give SPDif stereo or 2 channel output at 44.1/48/88.2 and 96KHz
samplerate, and at 24bit resolution.
POWER
·
3.4 Watts.
·
IEC socket for power cable.
·
Reversible fuse holder for 230VAC and 115VAC power input.
HOUSING
·
2U rack mounting totally enclosed aluminium case.
·
depth approx. 250mm.
·
weight 1.5Kgs.
REGULATIONS AND SAFETY
The
JOEMEEK 'TwinQ'
has been designed and built to conform to all
known safety requirements in the world.
Within the European Union the 'TwinQ' easily meets the
requirements for electrostatic and electromagnetic emissions, and conforms
to all safety requirements of the European Common Market. the 'CE'
symbol on the rear of the unit indicates compliance.
In the United States of America the 'TwinQ' utilises UL approved
components and complies with UL requirements.
WARRANTY
In the unlikely case of a breakdown, please return the unit in its original
packing through the supplier.
The unit will be attended to immediately and returned to your supplier.
twinQ
CS
Dual Recording Channel
- User's guide
