4.0 Post – Mounting Instructions
Before starting a tractor equipped with a JDP cab:
1.
Clear the cab and tractor of all tools. Tools left in or around the cab and tractor can cause
operator interference which could lead to bodily injury and/or damage the machine.
2.
Inspect the cab and tractor to ensure all bolts are tight and tighten if required.
3.
Ensure that all pedals, levers, and controls have adequate clearance for normal operation.
4.
Ensure that all electrical components of both the cab and tractor operates normally.
5.0
Trouble Shooting
In the following section, Jodale Perry has listed many of the problems, main causes, and practical
solutions to the problems you may encounter. If you encounter a problem that is difficult to
solve, contact you local Jodale Perry dealer.
PROBLEM
CAUSE
SOLUTION
Poor wiper coverage
Wipe angle too narrow
Increase wipe angle on
motor
Wiper blade contacts
Wipe angle too wide
Decrease wipe angle on
cab frame
motor
Page 7