The switchplate is located under the upper A-A
crossmember beneath the roof.
1.
Front Work Light Switch (optional)
Rocker switch
Low position:
Off
High position:
On
2.
Rear Work Lamp(s) Switch
(optional)
Rocker switch
Low position:
Off
High position:
On
3.
4 – way Flasher/Beacon Switch
(optional)
Rocker switch
Note: If the cab is equipped with
signals lights, the 4 – way
flashers switch is location on the
signal switch.
Low position:
Off
High position:
On
4.
Turn Signal Lever (optional)
Left position:
Down
Right position:
Up
5.
Front Wiper Switch (optional)
Rocker switch
Low position:
Low speed
Center position:
Off
High position:
High speed
Page 6
3.0 Operating Instructions
IMPORTANT
The following section locates, identifies and briefly describes the functions of all cab controls.
All operators should familiarize themselves with control location and function prior to operating
the tractor. Failure to do so may result in unsafe operation of the tractor and possible injury or
death to operators and bystanders.