STRUCTURE DIAGRAM & MAIN TECHNICAL PARAMETER
INSTRUSTION OF CONTROL PANEL
Plug in the fan, and check that indicator is on. Point the remote control at the receiving screen on the
panel and press the function keys to select which function you would like to run.
ON/SPEED
: Press once to start the fan then push again to adjust speed. It will show speeds 1,2and 3.
SWING:
Press this button, the rotating vane turning, the indicator of this function on, press again, the
function stop
TIMING:
Push to set the time that you need up to 8 hours in 1 hour increments. The LED display will
reflect your selection.
WIND:
Three settings: normal-natural-sleeping. Its normal when fan stars, to change press it to choose
the desire settings.
Normal:
The default setting will operate the 1, 2, or 3 speed;
Natural:
Simulates real wind with varying power levels.
Sleeping:
The fan will adjust from middle natural and weak natural in half hour increments until the
preset time is completed.
- 19 -
Rated Voltage
220V~
Rated Frequency
50Hz
Fan Power
50W
Humidity Power
30W
Total Power
80W
Mist Volume
230ml/h
Blade Diameter
300mm
Water tank
2000ML
