Testing
1. Clean the refrigerator with lukewarm water and detergent, and wipe dry.
Notes: Electrical components should be cleaned with a dry cloth.
2. Turn the thermostat knob to the middle position between “MIN” and "MAX" position, and
plug the refrigerator into the wall outlet. The compressor will begin to run.
3. Check, after 30 minutes of operation, to ensure that the freezer is cold.
TEMPERATURE CONTROL
1. The temperature controller installed in the upper cover controls the temperature in the
refrigerator.
2. Turning the thermostat knob adjusts the temperature of the refrigerator
3. The marks on the knob are the temperature grades, not the exact number of the degrees of
temperature.”OFF” shows a forced STOP and “MAX” shows the lowest temperature. Turn
the knob from "MIN" position to "MAX" position clockwise, the temperature decreases
continuously. You may set the temperature control selector to any position according to
what you need.
4. The factory recommended the middle position between “MIN” and "MAX".
-18-
