38
TURN-ON AND TURN-OFF INSTRUCTIONS
1.
Check and ensure that an AA battery is inside the ignition
chamber and has power. Ensure the anode (+) faces
outside.
2.
Ensure that the control knob is
OFF
. Slowly open the gas
cylinder valve.
3.
Press and turn the control knob to
LIGHT
position, push
the igniter to generate spark while keeping control knob in
pressed position
4.
Check for pilot flame through glass tube. If pilot does not
light, turn control knob to
‘OFF’
position wait two minutes
minimum and try again from the start. Some attempts may
be necessary.
5.
If the pilot alight, keep control knob pressed for 15 seconds
then turn the control knob to
‘LOW’
.
6.
For maximum heat turn control knob to
‘HIGH’.
7.
To turn heater off, turn control knob to
‘OFF’.
8.
Close the valve of the gas cylinder or the regulator after use.
STORAGE
Between uses:
•
Turn the control knob to “OFF” position.
•
Turn LPG cylinder to “OFF” position.
•
Store heater upright in an area sheltered away from weather conditions (such as rain,
sleet, hail, snow).
•
If desired, cover heater to protect exterior surfaces and to help prevent dust and debris
collecting in air passages.
During periods of extended inactivity or when transporting:
•
Turn the control knob to “OFF” position.
•
Disconnect LPG Cylinder and move to a secure, well-ventilated location outdoors.
•
DO NOT store in a location that will exceed 50 degrees Cº.
•
Store heater upright in an area sheltered away from weather conditions (such as rain,
sleet, hail, snow).
•
If desired, cover heater to protect exterior surfaces and to help prevent dust and debris
collecting in air passages.
WARNING:
FOR YOUR SAFETY:
•
DO NOT touch or move heater for at least 45 minutes after use.
•
Allow all burner elements to cool before touching.
OFF
LIGHT
LOW
HIGH
