INTRODUCTION OF CONTROL PANEL
(
The silkscreen is subject to change without prior notice.
)
AFTER POWER-UP
As soon as the bread maker is plugged the power supply, a beep will be heard and “
1
3:00 ”
appears in the display. But the two dots between the “3” and “00” don’t flash constantly. The
“
1
” is the default program.
1000g
and
MEDIUM
will appear on LCD. They are default setting.
START/STOP (INICIAR/PARAR)
Starting and stopping the selected baking program.
To start a program, press the “
START/STOP
”
(INICIAR/PARAR)
button for approx. 1.5
seconds. A short beep will be heard and the two dots in the time display begin to flash and the
program starts. Any other button is inactivated except the
START/STOP (INICIAR/PARAR),
LIGHT (LUZ), and PAUSE (PAUSA)
buttons after a program has begun.
To stop the program, press the “
START/STOP
”
(INICIAR/PARAR)
button for approx. 1.5
seconds, then a beep will be heard, it means that the program has been switched off.
- 36 -
This indicates the program
you have chosen.
The operation time for each
program.
