background image

7

unreel a cable drum to its full length so that the entire cable can be checked for
damage.
. Use the envisaged cable suspension when attaching an extension cable.
. Never pull the cable to disconnect the plug from the socket. Protect the cable
from heat,oil and sharp edges.
. If the connecting cable is damaged, first disconnect the extension cable from
the socket.You can then disconnect the connecting cable of the equipment.
. If the power cable for this equipment is damaged, it must be replaced by the
professional technicians in order to prevent hazards.

Residual risks

Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be ruled out.The following hazards may arise
in connection with the equipment's construction and layout:

1. Damage to hearing if no suitable ear protection is used.
2. Health damage caused by hand-arm vibrations if the equipment is used over
a prolonged period or is not properly guided and maintained.
3. Even when all safety measures are taken,some remaining hazards which are
not yet evident may still be present.
4. Remaining hazards can be minimized by following the instructions in Safety
Precautions, Proper Use and in the entire operating manual.
5. Injuries caused by the rotating blade.
6. Health risks caused by electricity. When incorrect or damaged mains cables
are used. Follows instructions in the manual Electrical Connections.

Warning!

This electric tool generates an electromagnetic field during

operation.This field can impair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or deadly injuries,we
recommend that persons with medical implants consult with their physician and
the manufacturer of the medical implant prior to operating the electric tool.

Summary of Contents for CT5592

























Reviews: