Jobsite CT5592, Original Instructions Manual

Page: 6 / 24

5
tilt the implement only to the extent that is absolutely necessary and always lift
the implement on the side that is opposite to the operator.
. Do not operate the implement in the vicinity of inflammable liquids or gases as
this could give rise to the danger of a fire or explosion.
Work intervals:
. After the implement has been turned off, the cutting cylinder will continue to
rotate for a few seconds.Keep hands and feet well away.
. Only shift working depth when the implement is completely still standing.
. Only remove plant parts and soil when the implement is standing completely
still.
. Switch off the power when the implement is to be transported
，
lifted or tilted and
when traversing other surfaces than soil.
. Never leave the implement unattended at the place of work.
. Always switch off the implement and disconnect the power plug:
- Whenever you leave the implement
- Before you clean the ejector opening or unblock or unclog the implement
- When the implement is not being used
- During all maintenance and cleaning work
- When the power cable is damaged or has become tangled
- When the implement hits an obstruction during work or when unusual
vibrations arise.Establish the cause and see if the implement has been
damaged.
. Do not repair it yourself! Have the implement repaired by an authorised
workshop!
. Store the implement in a dry place well out of reach of children.
CAUTION! The following states how to avoid damage to the implement and any
resulting harm to people:
Take care of your implement
. Switch off the power when the implement is to be carried across steps.
. Inspect the implement each time before it is to be used. Never operate the
implement if safety devices (e.g. impact protector
，
parts of the cutting facility or
bolts are missing, worn out or damaged.Check especially the power cable and