10
TABLE 3. TIGHTENING TORQUE (in. kg/cm) Diameter
Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm
4T
70
150
300
500
750
1100
1400
2000
6-8T
100
250
500
800
1300
2000
2700
3800
11T
150
400
800
1200
2000
2900
4200
5600
*
100 (6mm) 300-350 (8mm) 650-700 (10mm)
*(In case counter-part is of aluminium)
(Threads in use with this machine are all right handed)
Material and quality of material is marked on each bolt, and screw.
CAUTION:
These inspection intervals are for operation under normal conditions.
Adjust your inspection intervals based on the number hours plate
compactor is in use, and particular working conditions.
CAUTION:
Fuel piping and connections should be replaced every 2 years.
Daily Service
Check for leakage of fuel or oil.
Remove soil and clean the bottom of compaction plate.
Check engine oil.
Check for loose screws including tightness. See Table 3 above (tightening
torque), for retightening.
Changing Vibrator Oil
When changing the vibrator oil, remove the drain plug located at the
bottom-right of the vibrator, and simply tip the compactor to drain the oil. Note
that the oil will drain more easily while it is hot.
Air Filter
1. The air filter element should be cleaned because a clogged air cleaner can
cause poor engine starting, lack of power and shorten engine life
substantially.
2. To clean or replace air filter loosen the wing nut on the air filter housing
(Figure 1), remove the cover and take out air filter cartridge. If only cleaning
