12
● Replacing the V-belt
Remove the upper and lower belt covers. Engage an offset wrench (13mm)
or the like to vibrator pulley (lower) fastening bolt. Engage waste cloth or the
like at midway of V-belt on the left side and while pulling it back strongly,
rotate the offset wrench clockwise so that the V-belt will come off.
● Reinstalling the V-belt
Engage V-belt to lower vibrator pulley and push the V-belt to left side of upper
clutch and, in the same manner as in removal, rotate offset wrench clockwise
so that the V-belt goes back on.
● Checking Clutch
Check the clutch simultaneously with V-belt checking. With belt removed,
check outer drum of the clutch for seizure and “V” groove for wear or damage
with your eyes. Clean the “V” groove as necessary. Wear of lining or shoe
should be checked with running check. If the shoe is worn, power
transmission becomes deficient and slipping will result.
7. TRANSPORTATION
1.
Always shut off engine when transporting machine.
2.
Make sure lifting device has enough capacity to hold machine (see
identification plate on machine for weight).
3.
Use lifting point when lifting machine.
4.
Trolley wheel as optional is used for short distance transportation.
