jobmate YT5107 User Manual Download Page 10

11 

•  Keep your hands, face and feet away from all moving parts.

•  If possible, avoid cutting wet grass.

•  Exercise proper precaution when mowing on sloping ground. 

W

atch your footing

   and wear non-slip footwear. Mow along the slope not up and down it. Do not mow

  

   on steep slopes. Be especially cautious when changing direction on slopes, stand

   above the mower to avoid risk of injury.

•  Never operate the mower barefoot or when wearing open sandals or canvas  

   shoes.

•  Do not mow by pulling the machine towards you.

•  When mowing, keep the cable away from the mower.

 Y

our direction of work

   should be away from the power point. Mow in straight lines, not in circles.

• 

 

Always keep hands and feet away from rotating parts.

•  Check the grass box frequently for wear or deterioration.

• 

 

After use, disconnect the machine from the power supply and check for damage.

  

   If you have the slightest doubts, check with an authorised service centre.

•  Only use the machine according to the instructions given in this manual.

   Keep the mower free of grass, leaves and other debris build-up.

•  Do not tilt the mower when switching on the motor, except if the mower has to

   be tilted for starting. In this case, do not tilt it more than is absolutely necessary   

   and lift only the part which is away from the operator.

 

Always ensure that both  

   hands are in operating position before returning the mower to the ground.

•  Do not try to repair the machine or access internal parts. Use authorised service

   centres only.                

•  Do not get distracted and always concentrate on what you are doing. Use  

   common sense. Never operate the machine when you are tired, sick or under the

•  Keep these instructions. Refer to them frequently and use them to instruct other

   users. If you loan some one this unit, also loan them these instructions.

• 

 

The operator or user is responsible for accidents or hazards occurring to other

   people or their property.

•  Failure to follow operating instructions and safety precautions in this instruction   

   manual can result in serious injury. Read the manual before starting or operating  

   this unit.

   W

ear eye protection      

   W

ear hearing protection       

   W

ear respiratory protection

ADDITIONAL SAFETY INSTRUCTIONS FOR 

ELECTRIC GARDEN LAWN MOWER (CONT.)   

Summary of Contents for YT5107




















Reviews: