OPERATION
Switching ON and OFF ( Fig. 5 )
1. Form a loop in the end of the extension cable, conduct it through the opening in the upper
handle (2) and hang it onto the strain relief (3).
2. Connect the trimmer to the electrical socket.
3. Ensure a secure stance and hold on to the trimmer with two hands. Do not rest the cutting
head on the ground.
4. To switch on depress the ON/OFF switch (1). Release the switch to switch off.
WARNING
Danger of injury!
12
Never use the trimmer without its safety guard. Always check the operability of the trimmer before it
is used. Check that the electrical voltage is the same as indicated on the rating plate. Always wear
goggles when working with the trimmer.
After the trimmer has been switched off the cutting head will continue to rotate for a few
seconds. Keep hands and feet well away.
The ON/OFF switch must not be locked in place. The trimmer must not be used if the
switch is damaged. There is the immediate danger of injury if the motor does not switch
off after the ON/OFF switch has been released.
NOTE:
Always remove grass residue from cutter so that the cutting effect is not impaired.
Fig. 5
WARNING
WARNING
①
②
③
