31
Loading a Body
The operator of the hook-lift is responsible for handling it. Care must be taken to
avoid injury or damage. Before operating the hook-lift make sure that you have read
and are fully aware of the warnings in this manual and on the hook-lift.
Read the information under
"Distributing a Load on a Body", on page 29
before loading the
body.
Follow the instructions below to load the body.
1.
Visually check that the load is evenly dis-
tributed on the body.
2.
Make sure that there is nobody within the
working area of the vehicle and the body.
3.
Start the hydraulic pump.
l
CBW controller – the pump icon is displayed at the top of the screen. See
.
l
LED display – the pump LED will illuminate. See
"LED Display and Buttons", on page 20
.
4.
Open the hydraulic lock.
l
CBW controller – the icon for open
hydraulic lock is displayed on the
screen. See
l
LED display – the indicator lamp for the
hydraulic lock lights red. See
.
5.
Tip the tip frame and run the sledge back.
6.
Open the safety hook.
Hookmaster manual: 13293 Edition 6 | 2021-02-22
Summary of Contents for Hookmaster
