36
Operation instructions
Demonstration picture
1. Screw out the fastening nut of the
threading terminal in
counterclockwise direction.
2. Unplug the cable
6.8.3 Mounting and dismounting of cover panel
For any special reason, you may need to disassemble the cover, and ensure better
seal performance, please operate according to the following instruction .
1. W hen disassemble inverter cover, use the cross screwdriver, screw the cover screw
in turn, and then disengage the grounding wire from the grounding screw of the
inverter cover.
2. W hen do mounting of cover, first connect the grounding wire to the grounding
screw of the cover. Then put cover on, use the cross screwdriver, the torque is
1.8±0.2N·M, lock the cover screw in turn.
