4
To press the “
HOUR
”key one time
，
will add one hour, the hour number will be displaying on the screen.
Pressing the“
HOUR
” without stop, the hours will increase continually till stop pressing the key. The hours
adjustment range is
AM 0~PM 11
.
To press the “
MIN
”key one time
，
will add one minute, the minute number will be displaying on the screen.
Pressing the“
MIN
”without stop, the minutes will increase continually till stop pressing the key. The minute
adjustment range is
0-59
.
After seting the start time of Circulation-cleaning
，
and move on to set the working time of circulation-cleaning.
(3)
、
Press
“
SET
VOL+
”
key to shift to the setting mode of the working time of circulation-cleaning. At this
moment, the time displaying on the screen is at least 5 minute., the working time number on the screen
won
’
t flash. To press the
“
MIN
”
key one time, the working time will add 5 minute. The maximum
working time of circulation time is19 hours 55 minutes(this time can be adjusted according to the user).
After setting the working time of Circulation-cleaning
，
and move on to set the ozone working in
synchronization
(4)
、
And then press the
“
SET
VOL+
”
key again to set startup the ozonizer working in synchronization, at this
time, the
“
OZONE
”
signal will be flashing on the screen. This flashing signal indicates the ozonizer doesn
’
t
work in synchronization. Press the
“
OZONE
”
key to startup the ozonizer, when the ozonizer woks, the
“
OZONE
”
signal will be displaying on the screen.
(5)
、
after the steps are done, press the
”
PUMP3
”
key to confirm the setting, or wait for 6 seconds, the
system will confirm the circulation cleaning setting and quit out setting mode.
Detailed steps refer to the below Fig.
(1
）
PUMP3
MIN
(2
）
OPEN
set: start time of Circulation-cleaning
HOUR
(3
）
SET
VOL+
MIN
set: working time of Circulation-cleaning
(4
）
SET
VOL+
OZONE
startup
ozonizer in synchronization
